NuStreams-P9A

NuStreams-P9A

Price On Request
Brand: Xtramus
Product Code: NuStreams-P9A
Availability: In Stock
Qty:
 

NuStreams-P9A is an eight-port stand-alone Switch /Residential Gateway (Broadband Router) test device for testing switches and broadband routers (along with their switch ports) at wirespeed with its 8 Switch Ports, and 1 WAN Port. Also, NuStreams-P9A can also be connected to PC for accessing its simple and easy-to-use configuration utility.

Each of NuStreams-P9A’s 3 RUNs contains 4 Tasks. These Tasks allow users to simultaneously perform tests in 10M Full/Half and 100M Full/Half with a single button. This innovative design can greatly reduce the time consumed when performing product tests.

With 3 different Test Types (Router, Switch, and Router + Switch) available, NuStreams-P9A can perform tests on switch/router, or combining each of these test subjects under “Router + Switch” Test Type, and test a broadband router’s WAN/LAN performance at the same time. NuStreams-P9A supports bi-direction LAN/WAN test packets with 253 IP addresses. Each IP has its own settings and transmitting/receiving counters, including independent statistics and calculations for latency and Serial Number. Also, both DUT and NuStreams-P9A’s IP addresses can be any IP of 256 IP addresses from Class C.

NuStreams-P9A comes with its own utility software. NuSet-MiniPG allows users to set DUT test criteria, upgrading NuStreams-P9A firmware/FPGA, and accessing detail test logs/statistics for further analysis. With the ability to provide high reliable test results and the best cost/performance ratio, NuStreams-P9A is the best solutions available for router and switch tests.

 



NuStreams-P9A Switch Test


NuStreams-P9A Router Test

   Feature
 
  • Compact, lightweight, and portable 8-port test device for testing network switches and routers
  • Built-in test modes with pre-defined templates for customization:
  • Flexible WAN port connection for router tests:
    • Static IP
    • DHCP (Dynamic Host Configuration Protocol)
    • PPPoE (Point-to-Point Protocol over Ethernet)
  • Supporting bi-direction LAN/WAN test packets with 253 IP addresses. Each IP has its own settings and transmitting/receiving counters, including independent statistics and calculations for latency, Serial Number, and VLAN Tags 
  • Both DUT and NuStreams-P9A’s IP addresses can be any IP of 256 IP addresses from Class C
  • Supports and can receive packet in PPP LCP, IPCP PAP formats
 
  • Tests are performed automatically in a step-by-step manner, which makes NuStreams-P9A a more productive solution than traditional PC-based solutions
  • NuStreams-P9A’s hardware information, such as FPGA/Firmware version and system temperature, is available and can be checked on its LCD screen
  • LCD screen for displaying test results and related statistics
   
 
Interface
 
  • LAN: 8 x 10/100 Mbps UTP Ethernet test ports
  • WAN: 1 x 10/100 Mbps UTP Ethernet test ports
  • Management Port: 1 x USB 2.0 port
  • Console Port for NuPAD Keypad: 1 x 38400 bps UTP port
  • 12V DC Power Jack
  • Configuration buttons: 4 x buttons for test configuration
  • Operation buttons: 4 x hotkeys for test operation
LED Indicator
 
  • System Status
        Power: Power ON status
        SYS: Ready status of this machine
        USB: USB cable is connected to PC
  • Test Status
        Pass: DUT pass the test
        Fail: DUT does not pass the test
  • Test hotkey status
        Pause: Pause current running test
        Run 1: Test Task of Run 1 is going
        Run 2: Test Task of Run 2 is going
        Run 3: Test Task of Run 3 is going
  • Test Step Status: 
    System goes test step by step from 1~4
        1: Nway Test connection test
        2: Switch: Nway Test connection test / Router: Parameter
      configuration test. Send DHCP, ARP, TCP for reply
        3: Test Starts
        4 Test is done and able to view result.
  • WAN connection status
        Link/ACT: WAN port is connected to router
        10M: 10Mbps connection is linked
        100M: 100Mbps connection is linked
        Static IP: Static IP for router to link with
        DHCP: Assign IP for router to link with
        PPPoE: Provides PPPoE connection for router to dial-up 
  • WAN port status
        Link/ACT: Physical connection status
        Speed: Connection speeds with different LED colors. 
  • LAN ports (0~7) connection status
        Link/ACT: LAN port is connected to switch / router
  • LAN ports (0~7) status
        Link/ACT: Physical connection status
        Speed: Connection speeds with different LED colors.
Applications
 
  • Production and quality assurance/ quality control tests during manufacturing process
  • Functional validation of network product
  • Troubleshooting at service/ maintenance outlets
Test Modes
 
  • Auto Test (AT): Includes Router Test & Switch Test. User-defined or pre-defined Excess/Loss tolerance to identify Pass/Fail result of Auto Test
Dimension
  176 mm X 86 mm X 32.6 mm
Temperature
 
  • Operating: 0°C~ 40°C (32°F~ 104°F)
  • Storage: 0°C~ 50°C (32°F~ 122°F)
Humidity
 
  • Operating: 0% ~ 85% RH
  • Storage: 0% ~ 85% RH
Net Weight
  Approx. 530g
Power Source
  External Power Adapter
  • Input: AC 100 V ~ 240 V, 50 Hz ~ 60 Hz
  • Output: DC 12 V
    Built-in button battery to keep date and time

 

Write a review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below: